Preview
GSWB-2508-78
SPD™ Welded End Gas Struts are engineered to offer a rigid mounting system that occupies minimal space. The welded blade ends are thinner than typical end fittings that attach via threads. Each end has a through-hole (diameter varies) for a pin or bolt.
Welded End Gas Struts from ASRaymond are a counterbalance product that is made from nitrided and epoxy coated steel construction for corrosion resistance. The spring force listed is for the extended position of the strut; forces will increase about 30% as the strut is compressed. Customisation is available for applications that require a non-standard configuration
Diagram / specifications section
Preview
| B | Body Tube Diameter (mm) | 18 |
| R | Rod Diameter / Inner Tube (mm) | 8 |
| SD | Shoulder Distance (mm) | 478 |
| S | Stroke (mm) | 213 |
Item specifications
- Damped Height (mm)40
- Force at Length 1 (mm, N)350
- Force at Length 2 (mm, N)473
- K-Factor1.35
- Max. Operating Temperature (°C)80
- Min. Operating Temperature (°C)-25
- Spring Rate (N/mm)0.58
- Weight (kg)0.186248
