Preview
W08DBV0500
SPD™ Welded End Gas Struts are engineered to offer a rigid mounting system that occupies minimal space. The welded blade ends are thinner than typical end fittings that attach via threads. Each end has a through-hole (diameter varies) for a pin or bolt.
Welded End Gas Struts from ASRaymond are a counterbalance product that is made from nitrided and epoxy coated steel construction for corrosion resistance. The spring force listed is for the extended position of the strut; forces will increase about 30% as the strut is compressed. Customisation is available for applications that require a non-standard configuration
Diagram / specifications section
Preview
| B | Body Tube Diameter (in) | 0.709 |
| R | Rod Diameter / Inner Tube (in) | 0.315 |
| SD | Shoulder Distance (in) | 8.51 |
| S | Stroke (in) | 3.15 |
Item specifications
- Damped Height (in)1
- Force at Length 1 (in, lbs)112
- Force at Length 2 (in, lbs)151
- K-Factor1.35
- Max. Operating Temperature (F)176
- Min. Operating Temperature (F)-13
- Spring Rate (lbs/in)12.38
- Weight (lb)0.2262
