Preview
BM795-085
SPEC® Disc Springs for Ball Bearings are specifically designed for use with standard-sized ball bearings. Sometimes referred to as Belleville springs, ASRaymond’s Disc Springs are matched for use with commonly available bearings.
ASRaymond’s Disc Springs for Ball Bearings apply a preload to bearings, limiting play and reducing wear. When included in an assembly, these bearing-matched Spring Washers provide the necessary slack take-up on shafts and housings. They help extend the life of such systems, while eliminating noise and vibration.
Minimum quantity: 10
Diagram / specifications section
Preview
| FH | Free Height (in) | 0.091 |
| ID | Inside Diameter (in) | 2.185 |
| P | Load at Deflection (lbf) | 59.3 |
| OD | Outside Diameter (in) | 3.13 |
| D | Spring Deflection (in) | 0.044 |
| t | Thickness (in) | 0.031 |
Item specifications
- Bearing Number6010, 6208
- FinishNone
- MaterialHigh Carbon Steel Strip
- Material Chemistry/DimensionalJIS G3506
- Material TypeCarbon Steel
- Max. Operating Temperature (°F)250
- Min. Operating Temperature (°F)-40
- Weight (lb)0.03528
