Preview
GSWB-3286-179
SPD™ Welded End Gas Springs are engineered to offer a rigid mounting system that occupies minimal space. The welded blade ends are thinner than typical end fittings that attach via threads. Each end has a through-hole (diameter varies) for a pin or bolt.
Welded End Gas Springs from ASRaymond are a counterbalance product that is made from nitrided and epoxy coated steel construction for corrosion resistance. The spring force listed is for the extended position of the strut; forces will increase about 30% as the strut is compressed. Customization is available for applications that require a non-standard configuration
Diagram / specifications section
Preview
| B | Body Tube Diameter (in) | 0.866 |
| L | Extended Length (in) | 11.26 |
| R | Rod Diameter / Inner Tube (in) | 0.394 |
| SD | Shoulder Distance (in) | 10.08 |
| S | Stroke (in) | 3.74 |
Item specifications
- Anticipated Life (cycles)30000
- Damped Height (in)1.38
- FinishNitride
- Force at Length 1 (in, lbs)180
- Force at Length 2 (in, lbs)252
- K-Factor1.4
- Material Specification144H ASTM B117
- Max. Operating Temperature (°F)176
- Min. Operating Temperature (°F)-13
- Rod End Fitting TypeBlade
- Spring Rate (lbs/in)19.25
- Weight (lb)0.4311
