Preview
U312-0110
SPEC® Curved Spring Washers are often used to absorb axial end play. They deliver relatively light thrust loads. The spring rate is approximately linear up to 80% of available deflection. Parts are available in plain finish, carbon steel, and stainless steel. Curved Spring Washers are supplied deburred with the set removed.
Minimum quantity: 25
Diagram / specifications section
Preview
| FH | Free Height (in) | 0.062 |
| ID | Inside Diameter (in) | 0.331 |
| P1 | Load at H1 (lbf) | 4.5 |
| H1 | Loaded Height (in) | 0.035 |
| OD | Outside Diameter (in) | 0.49 |
| t | Thickness (in) | 0.011 |
Item specifications
- Material1070-1095 Strip
- Material Chemistry/DimensionalASTM A684
- Material TypeCarbon Steel
- Max. Operating Temperature (F)250
- Min. Operating Temperature (F)-40
- Weight (lb)0.00032
