Preview
V14XDR1500
SPD™ Reducible Force Gas Springs bring adjustable pressure to applications. Each spring is fitted with a bleeder valve and comes fully pressurized. Once installed in the application the pressure can be reduced gradually until functioning at the desired force.
For scale applications this represents an opportunity to determine the correct pressure for production. Simply return the properly functioning strut to ASRaymond for profiling. The below parts are offered in nitrided protected steel or 300 series stainless steel construction.
Diagram / specifications section
Preview
| Db | Body Tube Diameter (in) | 1.102 |
| Dr | Rod Diameter / Inner Tube (in) | 0.551 |
| S | Stroke (in) | 10.83 |
Item specifications
- Anticipated Life (cycles)30000
- Body End Fitting TypeThread Only
- Damped Height (in)1.57
- Force at Length 1 (in, lbs)337
- Force at Length 2 (in, lbs)506
- K-Factor1.5
- Max. Operating Temperature (F)176
- Min. Operating Temperature (F)-13
- Rod End Fitting TypeThread Only
- Spring Rate (lbs/in)15.6
- Weight (lb)1.58
