Preview
GSWB-4226-11
SPD™ Welded End Gas Springs are engineered to offer a rigid mounting system that occupies minimal space. The welded blade ends are thinner than typical end fittings that attach via threads. Each end has a through-hole (diameter varies) for a pin or bolt.
Welded End Gas Springs from ASRaymond are a counterbalance product that is made from nitrided and epoxy coated steel construction for corrosion resistance. The spring force listed is for the extended position of the strut; forces will increase about 30% as the strut is compressed. Customization is available for applications that require a non-standard configuration
Diagram / specifications section
Preview
| Db | Body Tube Diameter (in) | 0.591 |
| EL | Extended Length (in) | 8.9 |
| Dr | Rod Diameter / Inner Tube (in) | 0.236 |
| S | Stroke (in) | 3.15 |
Item specifications
- Anticipated Life (cycles)30000
- Body End Fitting TypeBlade
- Damped Height (in)1
- Force at Length 1 (in, lbs)11
- Force at Length 2 (in, lbs)14
- K-Factor1.3
- Max. Operating Temperature (F)176
- Min. Operating Temperature (F)-13
- Rod End Fitting TypeBlade
- Spring Rate (lbs/in)0.95
- Weight (lb)0.1387
