Preview
U3750100S
SPEC® Curved Spring Washers are often used to absorb axial end play. They deliver relatively light thrust loads. The spring rate is approximately linear up to 80% of available deflection. Parts are available in plain finish, carbon steel and stainless steel. Curved Spring Washers are supplied deburred with the set removed.
Diagram / specifications section
Preview
| FH | Free Height (mm) | 2.9 |
| ID | Inside Diameter (mm) | 10.2 |
| P1 | Load at H1 (N) | 20 |
| H1 | Loaded Height (mm) | 1.5 |
| OD | Outside Diameter (mm) | 17.1 |
| t | Thickness (mm) | 0.3 |
Item specifications
- MaterialType 301 Strip
- Material Chemistry/DimensionalASTM A666
- Material TypeStainless Steel
- Max. Operating Temperature (°C)316
- Min. Operating Temperature (°C)-196
- Weight (kg)0.000295
