Preview
V06GAM0400
SPD™ Reducible Force Gas Struts bring adjustable pressure to applications. Each spring is fitted with a bleeder valve and comes fully pressurised. Once installed in the application the pressure can be reduced gradually until functioning at the desired force.
For scale applications this represents an opportunity to determine the correct pressure for production. Simply return the properly functioning strut to ASRaymond for profiling. The below parts are offered in nitrided protected steel or 300 series stainless steel construction.
Diagram / specifications section
Preview
| B | Body Tube Diameter (in) | 0.591 |
| T | End Thread B (Body) (mm) | M6x1.0 |
| R | Rod Diameter / Inner Tube (in) | 0.236 |
| SD | Shoulder Distance (in) | 11.1 |
| S | Stroke (in) | 4.72 |
Item specifications
- Damped Height (in)1.38
- Force at Length 1 (in, lbs)90
- Force at Length 2 (in, lbs)120
- K-Factor1.33
- Max. Operating Temperature (F)176
- Min. Operating Temperature (F)-13
- Spring Rate (lbs/in)6.3
- Weight (lb)0.17
